• Very wide testing range from soft metal like lead upto hardest metals like hardened steel.
• Small indentation to allow testing of precision finished parts.
• Motorised loading and unloading.
• Suitable for thin sheet metals since test loads are very small.
• Built - in projection screw to get accurate results.
'Adinath' 1Vickers Hardness Tester is a simple and accurate means to products and measuring the diamond indentation. These testers are suitable for measuring the hardness of precision metallic parts result with wide testing range - from soft to hard, and their accurate result are widely acclaimed. These testers strictly conform to IS : 1754 - 1986
•Construction
The robust machine frame is designed to accommodate the high precision loading system and an optical projection screen. Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond penetration by means of lever & weights. The load is diamond penetration by means of lever & weights. The load is removed automatically after a specific lapse of time. The objective is indexed with the test piece and the diamond indentation is projected on the measuring screen. The diagonals of the indentation are measured by means of the micrometer screw of the projection screen.
•TECHNICAL DATA :
Test Loads
5,10,20,30,50 Kg
Magnification of optical projection
70 x
Max.Test Height ( mm )
200
Scale least count (mm )
0.001
Depth of Throat ( mm )
133
Dimensions of machine(mm )
L 585 x W 290 x H 860
Weight ( Approx )
73 Kg
Power Supply
220 V AC,50 hz,1 PH
•STANDARD ACCESSORIES
1. Standard Test Block
1 Pc
2. Diamond Indentor
1 Pc
3. Weights
1 set
4. Flat Anvil
1 Pc
5. Vee-type Anvil(Small and Big )
1 Pc each
6. Spanners
1 Set
7. Electric Cord
1 Pc
8. Instruction Manual
1 Book
•SPECIAL ACCESSORIES ARE AVAILABLE ON REQUEST AS PER SPECIAL REQUIREMENT.
