|
|
::
FATIGUE TESTING MACHINE :: |
|
| |
|
| |
Application & Operation:
Fatigue is one of the major reasons for failure of the materials used in all engineering designs. It is important to know fatigue properties of most of the materials before using them for actual application. Adinath Impex make Fatigue Testing Machine of AI-FT series is most suitable for draw S-N diagram. These are used by research institute, Auto industries and materials manufacturers. This is a rotating beam type machine where load is applied in reverse bending manner. Standard 8mm dia. Specimen is held in special holders at its ends and loaded such that it experience a uniform bending moment. Specimen is rotated at 4200 RPM by a motor. A complete cycle of reversed stress in all fibers of the specimen is produced during each revolution. The bending moment is applied thought a lever system and can easily be changed by moving a weight over a lever. |
| |
Features :
- Light weight, compact size, simple design.
- Table model. No need of foundation.
- Simple lever systems for changing load.
- Accurately calibrated as per IS 5075
- Machines can be supplied with Ncm. Calibration
|
| |
| Technical Specification: |
| |
Model AI-FT – 200 |
|
|
| 01. |
Maximum bending moment. |
|
Kg.cm 200 |
| 02. |
Bending moment adjustable |
|
Kg.cm 25-200 |
| 03. |
Ranges. |
i) |
kg. Cm 25-125 |
| |
|
ii) |
kg. Cm 125-200 |
| 04. |
Grpping dia of specimen |
|
mm 12 |
| 05. |
Testing dia of specimen |
|
mm 8 |
| 06. |
Rotating speed |
|
rpm 4200 |
| 07. |
Accuracy of applied bending moment |
|
+ 1 % |
| 08. |
Digital counter |
|
8 digit |
| 09. |
Power required |
|
hp 0.5 |
| 10. |
Main supply |
|
3ph, 415v, 50hz, a.c |
| 11. |
Overail size (appox) |
|
mm 1000 L.X. 500w X 600 h |
| 12. |
Weight (appox) |
|
kg. 120 |
|
| |
| |
|
|
|
|
 |