Computerized Vickers Hardness Tester Model AI-Vm 50 PC
VICKERS HARDNESS TESTER MODEL : AI-VM – 50 C • Built in projection screen to get accurate results.
• Tests Loads - 5, 10, 20, 30 & 50 kgf.
• Optional magnification - 70 X
• Scale Least count 0.001 mm.
FEATURES: • Fully Computerised (PC Based) Vickers Hardness Machine. • Direct and accurate measurement of Vickers Hardness Number using "State of Art" image processing technology. • 'Wide testing range’: from soft metal such as lead up to medium hardened steels. • High accuracy and repeatability of measurement at all loads. • Faster measurement yielding to higher productivity. • Small size of indentation makes it a non-destructive testing on finished components. • Motorised loading and unloading cycle. • Small loads allow testing of thin sheet metals. • Advanced Window XP based software.
Latest Graphical User Interface Features: • User-friendly software with all help file and Window Features.
• Online indentation setting and focusing on PC monitor.
• Advance image processing: Algorithms implemented for precise calculation of hardness
numbers with various options to cover all ranges of specimen.
Batch file Processing: Option for data/storage and reports generation.
Statistical Evaluation: Software for calculating standard deviation, mode medium, histogram etc.
• Wide options in calibration mode.
Calibration / Verification on PC monitor makes easier to operate.
SPECIFICATIONS: ADINATH' Computerised Vickers Hardness Tester is a simple and accurate means to produce automatically measure the diamond indentation to give Vickers hardness numbers. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard, and their accurate results are widely acclaimed. These testers strictly confirm to IS 1754 - 2002.
TECHNICAL DATA :
Total Loads
5, 10, 20, 30,50, kg
Max. Test Height(mm)
200
Scale least count(mm)
0.001
Throat depth(mm)
135
Machine Dimension (Approx.)mm
L 585 x W 290 x H 860
Weight (Approx.)mm
70 kg.
Power Supply
220VAC, 50Hz, 1Phase
PC REQUIRMENTS:
• Can be connected to Laptop or Desktop PC. Easy to carry anywhere and handy for use with easy setup.
• Minimum Pentium-IV with 256 Mb RAM
• Windows XP Operating System. (PC not included in standard scope of supply.)
• One USB 2.0 and one RS232 (serial) interface (9 pin) is required and it is recommended for Laptop to use external USB to serial converter for RS232 interface
CONSTRUCTION:
The robust machine frame is designed to accommodate the high precision loading.
Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond indentor by means of a lever and weights. After a specific image is digitized using a CCD camera fitted on the indentation are automatically measured by PC to given the Vickers Hardness Number.
ACCESSORIES:
1.
Standard Test Block
1 No.
2.
Diamond indentor
1 No.
3.
Weights
1 Set
4.
Flat Anvil
1 No.
5.
Vee-type anvil ( Small & Big )
1 No. each
6.
Spanners
1 Set
7.
Electric Cord & PC interface cord
1 No. each
8.
Video Capture
1 No.
9.
Vickers software CD
1 No.
10.
Instruction Manual
1 Book
Number of special accessories are available on request and as per special requirement.
Due to constant Research and Development, Specifications and subject to change without notice.
VICKERS HARDNESS TESTER MODEL : AI-VM – 50 C
